Hurricane Panel Clamps

This will be the place to find all your hurricane prep information. Whether it be preparing your home, family, pets or evacuation plans here is where to find the information you need.

Moderator: S2k Moderators

Post Reply
Message
Author
jrichards
Tropical Wave
Tropical Wave
Posts: 2
Joined: Tue Jun 06, 2006 7:45 pm

Hurricane Panel Clamps

#1 Postby jrichards » Tue Jun 06, 2006 7:57 pm

Hot New product for installing hurricane panels. They can be used for plywood, polypropylene and polycarbonate panels.

Check them out http://drdoall.com

Click on Hurricane Clamps under What's Hot.
0 likes   
Top
Alladin
Tropical Storm
Tropical Storm
Posts: 114
Joined: Tue Mar 28, 2006 6:11 pm

#2 Postby Alladin » Tue Jun 06, 2006 8:23 pm

Plylox clips work much better and are far less expensive. Installation of these clamps requires drilling into the mortar joint, stucco or wood trim. Wood trim with these devices installed would be ripped from the window along with your shutter.

These clamps are based upon a flawed design.
0 likes   
Top
Strings
Tropical Low
Tropical Low
Posts: 22
Joined: Wed Aug 09, 2006 5:27 am
Location: coastal Broward County, FL

#3 Postby Strings » Sat Aug 12, 2006 1:12 am

Pretty dubious, and the part about which "independent lab" tested them is all blurry. :roll:

It looks like they only go 3/4-1" deep, so even on a CBS home, especially with rough stucco or fake brick patterned stucco, you'd be grabbing a lot of stucco and little to no solid concrete.

Don't think you'll be seeing a NOA from Miami-Dade on these anytime soon. :wink:
0 likes   
Top
Post Reply

Return to “Hurricane Preparation”

Who is online

Users browsing this forum: No registered users and 91 guests